Dust and debris are only half the problem. Entrances, lobbies and food service areas collect the kind of soiling that a dry sweeper cannot shift: drink spills, tracked-in slush, grease near a kitchen pass, sticky residue in a cafe aisle. That needs water, detergent and agitation, and then it needs to be dried before anyone walks on it.
The Cleaning Robot – Scrubber 50 does the full sequence in one pass. It scrubs the hard floor and dries behind itself, so there is no wet stretch of floor waiting to be cordoned off and no second machine needed to finish the job. That matters most exactly where the traffic never stops.
Where the Scrubber 50 sits in the range
This is our dedicated scrubber rather than a general-purpose cleaner. If your problem is mostly dust and light debris on carpets or mixed floors, one of the navigation-led models in the range is the better fit. If your problem is wet or sticky soiling on hard flooring, the Scrubber 50 addresses it directly.
What sets the Scrubber 50 apart
- Washes and dries hard floors in a single pass, with no wet floor left behind
- Addressed specifically at spills, grease and sticky residue, not just surface dust
- Compact footprint that fits lobby entrances, service aisles and back-of-house corridors
- Multiple cleaning modes for different levels of soiling and different hard floor finishes
- Automatic return to dock, so the machine is charged and ready for the next window
- Real-time status monitoring, so a supervisor can see which areas are already done
- Quiet operation, so entrance areas can be dealt with while the building is trading
Scrubber 50 Specifications
| Dimensions (L x W x H) | 810 x 700 x 1070 mm |
|---|---|
| Machine weight | 157 kg (disc brush) / 148 kg (roller brush) |
| Cleaning width | 460 mm; 780 mm with side brush (roller version 406 mm) |
| Cleaning efficiency | 1,987 m²/h theoretical; 500 – 1,300 m²/h practical |
| Clean water / waste water tank | 30 L / 24 L |
| Battery | LiFePO4 60 Ah / 24 VDC |
| Charging time | 2 hours |
| Runtime per charge | 3 hours scrubbing; 8 hours dust mopping |
| Minimum pass width / turning width | 800 mm / 1100 mm |
| Brush pressure | 25 kg disc / 18 kg roller |
| Sensors | 2D LiDAR, 3D depth camera, RGB camera, anti-collision sensors |
| Compliance | IEC 63327 compliant configuration available |
Best suited to
Hotel and office lobbies with heavy entrance traffic. Shopping centre entrances and food courts. Restaurants, cafes and canteens where food and drink reach the floor. Airports and stations where hard flooring runs continuously. Hospitals, clinics and any environment where a dry, immediately walkable floor is a safety requirement rather than a nicety.
Deployment and support
Jaelin Tech supplies the Scrubber 50 worldwide, with commissioning support, operator training, spare parts and remote technical support. Tell us your floor finish and the type of soiling you are dealing with and we will confirm whether the Scrubber 50 is the right tool, or whether a dry-cleaning model is more appropriate for your site. OEM and ODM cooperation is available.
Frequently asked questions
Does it leave the floor wet?
No. Scrubbing and drying happen in the same pass, so the floor behind the machine is ready to walk on immediately.
Which floor finishes is it suitable for?
It is designed for hard flooring. Very uneven or unsealed surfaces should be discussed with us first, so we can confirm the right configuration.
Can it work around diners and shoppers?
Yes. It navigates around people and obstacles in real time, which is why it can be used in a confined entrance area rather than only in a closed building.
Related models
If your requirement leans a different way:
Reviews
There are no reviews yet.