Repainting a tall facade is not mainly a spraying problem — it is an access problem. Scaffolding takes weeks, rope-access crews price every metre of height, and a gondola carrying a sprayer, hoses and material leaves the wall covered in worker-dependent quality. The hanging robot removes the worker from the wall: it mounts under the gondola you already use, and the crew stays on the platform while the machine covers the surface.
The robot hangs below a standard working platform, installs in under 30 minutes, and sprays a swath up to 6 m wide with the two 120 L material tanks on board. Controlled from the platform over a 200 m range — local control panel plus an industrial touch-screen remote — it holds a machine-consistent film pass after pass, running 24-hour cycles on three-phase power.
Efficiency by coating type
Rated output depends on what the wall is being given:
| Coating | Rated efficiency |
|---|---|
| Real-stone paint (textured) | 120–170 m²/h |
| Emulsion (latex) paint | 150–200 m²/h |
| Sand-in-water textured coating | 190–240 m²/h |
Against a manual crew the machine works at 3–5 times the rate, and it does so continuously — no fatigue, no re-spray from a tired wrist. Controlled metering also cuts material consumption by roughly 5% compared with hand spraying, which on a 20,000 m² repainting contract is a line item of its own.
Compatible materials
The two 120 L tanks handle real-stone paint, sand-in-water and water-in-water textured coatings, emulsion paints and cementitious protective coatings. That last one matters: the same machine that repaints a tower can apply the anti-carbonation protection layer specified on concrete infrastructure, which is where facade work and dam work overlap — see the dam and slope painting robot for the climbing version of that job.
Where it fits
Best suited to repainting and protecting mid- and high-rise facades where a gondola or working platform is already part of the access plan: residential towers, hotels, office buildings and commercial fronts. If the building has no facade access system at all, or the surface is a dam slope rather than a wall, that changes the answer — the tracked lifting robot brings its own elevation.
Typical deployments are documented on the high-rise facade cleaning and repainting guide, together with the cleaning-versus-repainting decision.
Deployment and support
Jaelin Tech supplies the facade hanging robot worldwide with commissioning support, operator training and remote technical support. Send us the facade area, the coating system you plan to apply and the access equipment on site, and we will confirm the configuration and cycle plan. OEM and ODM cooperation is available.
Frequently asked questions
Does it replace the gondola?
No — it hangs below it. The gondola carries the machine and the crew; the robot does the spraying. If your building has no gondola, look at the tracked lifting model instead.
Who refills the material tanks?
The crew on the platform, from standard drums. Two 120 L tanks mean refills are scheduled around coating breaks, not mid-pass interruptions.
Can it hold a uniform film thickness?
That is the point of removing the human wrist: gun distance, travel speed and overlap are set once and repeated for every pass, which is where the material saving comes from as well.
Related machines
- Facade Lifting Painting Robot — tracked self-elevating sprayer for walls without facade access
- Dam & Slope Painting Robot — climbing machine for dams and 30–90° slopes
Reviews
There are no reviews yet.